How to automate your robot vacuum schedule

Step by step

1. 1 min

   Clear the floor environment

   Remove loose cables, small toys, and stray garments from the floor. Robot vacuums are prone to jamming on dense cords, which will terminate a scheduled run prematurely.

   Note: Ensure all interior doors are either fully open or firmly closed to define the cleaning boundaries.
2. 1 min

   Access the scheduling interface

   Launch your vacuum's companion app and select your device from the main dashboard. Navigate to the 'Schedule' or 'Automation' tab, typically found in the primary menu bar.

3. 1 min

   Define frequency and time

   Select the days of the week and the specific start time for your cleaning cycle. For high-traffic areas, schedule runs for mid-morning to ensure the robot finishes before peak family activity hours.

   Note: Avoid scheduling during evening hours to prevent collision noise during rest periods.
4. 1 min

   Set specific zone exclusions

   If your app supports zone cleaning, designate 'No-Go' zones around pet water bowls or fragile furniture. Save these settings to the schedule profile to ensure the robot respects these areas during every automated pass.

5. 1 min

   Confirm and synchronize

   Save your configuration and ensure the 'Schedule Enabled' toggle is set to the 'On' position. Check the app's notification center to confirm the vacuum has synced the new routine with its local firmware.

   Note: Test the schedule with a manual trigger to ensure the robot exits the dock correctly.