How to Connect a Smart Camera to Wi-Fi

Step by step

1. 1 min

   Verify your Wi-Fi frequency

   Most smart cameras operate exclusively on 2.4GHz Wi-Fi bands. Access your router settings to ensure your 2.4GHz network is active and distinct from your 5GHz network if your router uses band steering.

   Note: If your network combines bands, disable 5GHz temporarily during setup.
2. 1 min

   Power the device

   Connect the smart camera to a power source using the provided adapter. Wait for the status LED to blink, indicating the device is in pairing mode; if it does not blink, hold the reset button for 10 seconds.

3. 1 min

   Launch the companion app

   Download and open the manufacturer's dedicated application on your smartphone. Create an account or sign in, then select the Add Device or + icon to initiate the discovery process.

   Note: Ensure your phone is connected to the same Wi-Fi network you intend to use for the camera.
4. 1 min

   Sync network credentials

   Select your Wi-Fi network from the list provided in the app. Input your Wi-Fi password carefully, as most smart cameras do not support special characters in passwords and will fail to connect if an error is made.

   Note: Keep your smartphone within 6 inches of the camera during this handshake process.
5. 30 sec

   Finalize device registration

   Wait for the status LED on the camera to turn solid. The app will prompt you to name your camera and assign it to a room; select your preferences to complete the integration.

   Note: Check for firmware updates immediately after connection to ensure security patches are applied.