How to Conceal TV Cables for a Clean Setup

Step by step

1. 5 min

   Map the cable path

   Identify the shortest distance from the TV to the power outlet and peripheral devices. Ensure the path is free of wall studs by using a stud finder to prevent structural interference.

   Note: Avoid routing power cables through walls unless you are using a dedicated in-wall power extension kit.
2. 15 min

   Install surface-mount raceways

   Clean the wall surface to ensure adhesive strips bond correctly. Peel the backing from the cable raceway, press firmly against the wall, and snap the decorative cover over the routed cables.

   Note: Paintable raceways can be matched to your wall color to increase visual concealment.
3. 30 min

   Prepare in-wall access points

   If opting for in-wall routing, use a drywall saw to cut holes at the desired TV and outlet heights. Insert a low-voltage mounting bracket into each cutout to create a secure frame.

   Note: Verify the depth of your wall cavity is sufficient before cutting.
4. 10 min

   Fish cables through the wall

   Feed a fish tape from the top cutout to the bottom. Attach your HDMI and ethernet cables to the end of the tape, wrap securely in electrical tape, and pull them through the wall cavity.

   Note: Only use CL2 or CL3 rated cables for in-wall applications to comply with fire codes.
5. 20 min

   Install the in-wall power kit

   Insert the male end of your power relocation kit into the bottom mounting bracket and the female end into the top bracket. Connect the internal extension cord between the two plates inside the wall.

   Note: Never run a standard appliance power cord behind drywall.
6. 5 min

   Manage external cord slack

   Use adhesive cable clips or velcro ties to bundle any remaining slack behind the TV mount. Ensure no cables are pinched or stretched when the TV is pushed flush against the wall.

   Note: Check full range of motion for articulating mounts to ensure cables do not snag.